Powertrack International Specialty Hoses

Powertrack International is proud to present our customers with the highest quality products, fastest service, and extremely competitive pricing.

« Hose By Application « Oil & Gas Drilling Hoses « Industrial Fittings

Figure Number
Pressure Rating
Standard Service
Sour Gas Service
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
4"
5"
6"
8"
10"
12"
Cold Working
Test
Cold Working
Test
100 1000 1500       X X X X X X X    
200 2000 3000 X X X X X X X   X X X  
206 2000 3000 X X X X X X X   X X X  
207 2000 3000           X X          
300 2000 3000       X                
400 2500 3750 2500 3750               X X X X X
400 4000 6000 4000 6000       X   X X          
600 6000 9000       X   X X          
602 6000 9000 6000 9000 X X X X X X X          
1002 10,000 15,000 7500 11,250 X     X   X X X X      
1002 10,000 15,000 7500 11,250               X        
1003 10,000 15,000 7500 11,250           X X X        
1502 15,000 22,500 10,000 15,000 X   X X X X X X        
2202 15,000 22,500       X   X            

Figure 100

Hammer Union - Figure 100
  • Cold working pressure - 1000 psi.
  • Low pressure union. Manifold and general service.

Figure 200

Hammer Union - Figure 200
  • Cold working pressure - 2000 psi.
  • General Purpose Union.
  • Threaded and butt weld ends.

Figure 206

Hammer Union - Figure 206
  • Cold working pressure - 2000 psi.
  • O-ring in metal sub improves sealing and extends service life.
  • Cup & cone provide zero clearance against extrusion.
  • Threaded and butt weld ends.

Figure 207

Hammer Union - Figure 207
  • Cold working pressure - 2000 psi.
  • Manifold and blanking the end of the line- O-ring cap provides leak-free seal- threaded and weld end.
  • Connection cap can be tapped for pressure guage or valve.

Figure 300

Hammer Union - Figure 300
  • Cold working pressure - 2000 psi.
  • Flat face design for straight breakout of connected components such as valves or fittings for repair or inspection.
  • Moderate vacuum service insulating unions available upon request.

Figure 400

Hammer Union - Figure 400
  • Cold working pressure - 4000 psi for 2" through 4" sizes. Sizes 5" through 12" cold working pressure is 2500 psi.
  • Primarily used for manifold pumping and mud.

Figure 600

Hammer Union - Figure 600
  • Cold working pressure - 6000 psi.
  • Used for steam service, well servicing, and boiler connection.
  • Primary seal is bronze to prevent corrosion and absorb expansion and contraction.

Figure 602

Hammer Union - Figure 602
  • Cold working pressure - 6000 psi.
  • Lip-type elastomer seal protects metal-to-metal seal and seal design reduces turbulence in the line.
  • Used primarily in manifold and mud service.
  • Available with non-pressure thread sealing ends.

Figure 1002

Hammer Union - Figure 1002
  • Cold working pressure -10,000 psi for 1" through 4" sizes. Sizes 5" through 6" - cold working pressure is 7500 psi.
  • Field replaceable lip type elastomer seal protects secondary metal-to-metal seal.

Figure 1003

Hammer Union - Figure 1003
  • Cold working pressure -10,000 psi for 2" through 3" sizes. Sizes 4" through 5" - cold working pressure is 7500 psi.
  • These misaligning unions are used in high pressure applications where the lines are not aligned.
  • 7" line misalignment accepted.

Figure 1502

Hammer Union - Figure 1502
  • Cold working pressure -15,000 psi.
  • Used primarily in choke/kill lines, cementing, fracturing, and testing.
  • Available in threaded, welded, butt weld, and non-pressure thread sealing ends.

Figure 2202

Hammer Union - Figure 2202
  • Cold working pressure -15,000 psi.
  • Used in sour gas services.
  • Meets Nace MR-01-75 standards.
  • Butt weld only.
  • Painted green for easy identification.