Hydraulic Jack Hose Assemblies

10,000 PSI Hydraulic Hose for Hydraulic Tool and Jack Line Applications

Thermoplastic Hose Specifications:

Powertrack International's Thermoplastic Hoses are built out of polyester elastomer tubing, reinforced with wire and aramid fibers, and covered in polyurethane. The Thermoplastic Hoses operating temperature is -40° to 212° F. The maximum water based fluid temperature is 158° F.The suggested fittings for the Thermoplastic Hoses are NPT, British or Metric.

Part Number Size Inside Diameter Outside Diameter Bend Radius Working Pressure Weight per Foot
T1040-04 4" .250" .540" 1.5" 10,000 psi .15
T1040-04NC* 4" .250" .570" 1.5" 10,000 psi .11
T1040-06 6" .375" .740" 3.75" 10,000 psi .24

*NC means non-conductive. Only available for the 4" size.

Rubber Hose Specification:

Hydraulic Tool Hose

Powertrack's Rubber Hose is bult out of synthetic, oil resistant rubber; reinforced with two high tensile steel wire braids; and covered in synthetic rubber. The suggested fittings are either a 1/4" or 3/8" Male NPT. The Rubber Hose's operating temperature is -40° ton 122° F.

Part Number Size Inside Diameter Outside Diameter Bend Radius Working Pressure Minimum Burst Pressure
HJack-04 4" .250" .583" 4.0" 10,000 psi 20,000 psi
HJack-06 6" .375" .740" 5.0" 10,000 psi 20,000 psi