Powertrack International Specialty Hoses

Powertrack International is proud to present our customers with the highest quality products, fastest service, and extremely competitive pricing.

« Hose By Application « Oil & Gas Drilling Hoses « Oil Field Industrial Hoses

Frac Tank Hose

Amored BOP Control Line Hose

 

3" and 4" Sizes:

Specially designed for high pressure discharge of crude oil for frac tank connections. Powertrack International can noe crimp frac hose up to 8".

Construction:

Reinforcement: High tensile synthetic cord with anti-static copper wires.
Cover: Oil, fuel, weather, and ozone resistant. Smooth, cloth impression, black nitrile.
Tube: Oil and fuel resistant conductive black nitrile.
Operating Temperature: -40°F to 180°F

Part Number Hose I.D. (in.) Hose O.D. (in.) Working Pressure (psi) Weight (lbs./ft.)
PT25-FRAC-48 3" 3.62" 400 1.8
PT25-FRAC-64 4" 4.72" 400 2.7

Frac Tank Hose

6" and 8" Sizes:

Ideal for handling fresh and salt water, tank bottoms, crude oil, and drilling mud. The corrugated cover allows for maximum flexibility.

Construction:

Reinforcement: High tensile synthetic plies with a wire helix.
Cover: Water, abrasion and ozone resistant. Flexible, corrugated, cloth impression, black SBR/EPDM.
Tube: Water, air, and oil mist resistant. Smooth black SBR/NBR.
Operating Temperature: -22°F to 185°F

Part Number Hose I.D. (in.) Hose O.D. (in.) Working Pressure (psi) Burst Pressure (psi) Weight (lbs./ft.)
PT25-FRAC-96 6" 6.71" 150 450 6.8
PT25-FRAC-128 8" 8.70 150 450 9.7

Frac Master 505

 

The Frac Master 505 easily handles higher working pressures along with being 30% lighter and 40% more flexible than traditional frac hose.

Construction:

-505 psi working pressure.*
-Lightweight and flexible.
-Over 4:1 safety factor.
-Tufflite abrasion / UV resistant cover.
-New braided interweave construction.

*Tested to ASTM D380 standards using crimped fittings.

Part Number Hose I.D. (in.) Hose O.D. (in.) Working Pressure (psi) Min. Bend Radius (in.) Weight (lbs./ft.)
PT-FRACHP-64 4" 4.59" 505 8 2.2

Frac Caps & Plugs

Designed to eliminate spillage while transporting your hoses. OurFRAC CAPS & PLUGS easily thread on the male or female FRAC HOSE ends. Available in 4", 6" and 8" sizes in either Soft and Pliable or Hard Heavy Duty vinyl threaded constructions.

Frac Tank Hose Assemblies

Frac Tank Hose Assembly
Frac Fitting

Hose Assemblies With Standard Ends

Part Number Description
PT25-FRAC-96/STD/43IN 43" Overall (including ends) w/6" Standard Frac Tank Ends
PT25-FRAC-96/STD/51IN 51" Overall (including ends) w/8" Standard Frac Tank Ends
PT25-FRAC-128/STD/43IN 43" Overall (including ends) w/8" Standard Frac Tank Ends
PT25-FRAC-128/STD/51IN 51" Overall (including ends) w/8" Standard Frac Tank Ends
PT25-FRAC-128/STD/63IN 63" Overall (including ends) w/8" Standard Frac Tank Ends
PT25-FRAC-128/STD/75IN 75" Overall (including ends) w/8" Standard Frac Tank Ends
PT25-FRAC-128/STD/240IN 20ft. Length w/8" Standard Frac Tank Ends
Frac Fitting

8" Hose Assemblies with West Texas Double Seal Ends

Part Number Description
PT25-FRAC-128/DBSEAL/43IN 43" Overall (including ends) w/8" West Texas Frac Tank Ends
PT25-FRAC-128/DBSEAL/51IN 51" Overall (including ends) w/8" West Texas Frac Tank Ends
PT25-FRAC-128/DBSEAL/63IN 63" Overall (including ends) w/8" West Texas Frac Tank Ends
PT25-FRAC-128/DBSEAL/75IN 75" Overall (including ends) w/8" West Texas Frac Tank Ends